The Industria Meccanica Bassi Luigi & Co. can rely on the most modern and complete equipment available to ensure the best quality and checking in any phase of production. As e resul, all phases are fully developed and controlled inside the factory:

Six departments have been created to supervise the production line.

• Forging/Heat Treatment Department
• Welding Prefabrication Department
• Machining Department
• Inspection/Quality Control Department
• Finishing/Dispatching Department
• Technical Department

• no. 12 presses, power from 200 to 5,000 tons.
• no. 11 furnaces for forging and heat treatment, capacity from 1 to 126 cubic/mts. Each furnace is equipped with thermocouples.
• Portable thermocouples for temperature registration.
• Dye stamps of 1" to 102" for production of Elbows, Bends, Tees, Reducers and Caps in hot and cold forming.
• no. 6 fork lifts, loading capacity from 2 up to 30 tons.

Heat treatment equipment

Elbow forging phase

• no. 1 Rolling machine for cold and hot rolling, max, capacity: 3.5 mts. length, 200 mm. wall thickness max.
• Plate cutting automatic equipment.
• no. 8 Fork lifts, loading capacity from 2 to 30 tons.
• no. 5 cranes, capacity 13 tons.
• no. 6 cladding computerized machines.

• no. 16 S.M.A.W.
• no. 5 M.I.G.
• no. 6 T.I.G.
• no. 6 Automatic S.A.W. (1,000/1,500 Ampere)
• no. 1 Semiautomatic S.A.W.
• no. 8 Welding Positioners (3 to 20 tons)
• no. 1 Automatic sand blasting/shot blasting with workroom of 12,00 x 4,000 x 6,000 mm. dimensions.
• no. 8 Fork lifts, loading capacity from 2 to 20 top

View of welding equipment

Rolling up to 70 mm. (cold plates) and up to 200 mm. (hot plates)

Pipe spool welding operations

• no. 12 Horizontal lathes .
• no. 20 Boring Mills
• no. 3 Surface plates.
• no. 4 Fork lifts, capacity 2 and 4 tons.
• no. 4 Cranes, capacity from 4 tons up to 10 tons.

Attached to the Machining Department a Grinding Department is arranged for the finishing of the fittings.

Special tee bevelling phase

• no. 1 Apparatus for M.P.I. of 6000A + no. 4 Yokes
• no. 4 U.S. Equipments
• no. 5 x-ray Equipments: 350/6, 300/5, 400/10
• Liquid penetrant
• Spectrometer
• Surface plates
• Instruments for dimensional check
• Hydrostatic test equipment
• Tensile test equipment (6 tons)
• Impact test equipment
• Vickers/Rockwell hardness test equipment

Magnetic particle examination

Stainless steel elbows packing phase

Alloy steel tees packing

Incolony manifold dispatching

Large diameter bend with support and compensation by Bassi Luigi Engineering

Gas reducing station.
Supply and site installation.

Gas piping for power plant.
Supply and site installation.

The Industria Meccanica Bassi Luigi & Co. can rely on a Technical Department for the design of standard and special fittings, pressure vessels, drams, prefabricated piping components, structural steels, complete skids for petrochemical plants, forced transmission water.

All our fittings are designed according to international rules using both burst test and mechanical calculation.

As to drawing an AutoCad Computer Sysytem is employed while as concerns calculations a Microsoft Excel Computer is used.

The calculations performed by our department are in accordance with the following international rules:

• Ansi B31.1 Ansi B31.3 Ansi B31.4 Ansi B31.8
• Ashe VIII
• BS 5500
• Trd 301
• Ad Merk Blatt B2, B3, B9
• Stoomwezen
• Din 2413

We are also in a position to carry out calculations according to Clients' specifications such as: NAM, GOST, AFNOR, and SHELL.